Description
The new memory type titanium alloy silicone nail correction patch is suitable for people who have nail problems such as ingrowth, curling, deformation. With strong elasticity, it generates an upward pulling force to pull back ingrown nails. It can rebound tens of thousands of times and bend 180 degrees without deformation. Tear off the protective film on the outside of the set, take out each accessory and place them in order. Follow the steps below to use. Step 1: Use the nail frosted bar to roughen the area of nail where the patch needs to be applied. The best position is in the middle of the nail, and roughen the area until it is dull and rough. Step 2: Use a cleaning wipe to clean the dust off the surface and gaps of the nail. Step 3: Apply the front side of the titanium alloy silicone patch onto the assisting patch (the front side of the patch is smaller, and the back side is slightly larger. It is okay if it is reversed, as the surrounding area will be reinforced with the nail glue). Use a short version for one side ingrown nail and a long version for two sides ingrown nail. Before dripping glue, you can try several times to find out the right way. Remove the glue bottle cap, pierce the glue nozzle with a bottle nozzle needle, and gently drip onto both ends of the patch. Step 4: Find the position on nail where the patch needs to be applied, with one end of the patch as close to the nail groove as possible. Use both hands to grab the two ends of the assisting patch and press it onto the nail for 8 seconds. Step 5: Then gently tear off the assisting patch and add a few drops of nail glue around the patch to reinforce it. The new titanium alloy silicone patch does not need for regular replacement, it can be used until the nails grow normally. It will not affect normal life. After 10 minutes of applying, you can take a shower, exercise, etc.
Features